Thermolab Shine Field Test by Electricity Scholar
[써모랩 샤인 필드 테스트 - 전기공자]
1. Introduction
[1. 서론]
Year ago, Thermolab released Baram on the market and Baram astonished overclocker of its own cooling efficiency with only 5 heat pipe. But, Since better coolers released on the market, Thermolab fans have to wait until they release new product on the market. At last, Thermolab released their new product named Shine on the market. It’s about time to Thermolab take back their cooling throne.
[1년전 써모랩은 단지 5개의 히트파이프로 놀라울 정도의 오버클럭 능력을 보여준 바람을 출시하여 오버클럭커드를 놀라게 했습니다. 그러나 시간이 지나고 좋은 쿨러들이 나오면서 써모랩의 팬들은 시장에 써모랩 신제품이 나올때 까지 손가락만 빨아야했죠. 마침내, 써모랩은 샤인이란 이름의 신제품을 시장에 출시했습니다. 이제 써모랩이 쿨링이란 왕좌를 되찾을 시간이 왔습니다.]
2. Product details
[2. 제품 소개]
Korean one old saying said, "First impression is most important." So, before I start this field test, I want you to explain about the component of Thermolab Shine&Bada, both have similar component, for better impression. Also, I want you to have some information before you buy even you have Baram, you are better to look these below because Thermolab release Shine with 3 major modified issues from Baram.
[한국속담에," 첫인상만큼 중요한건 없다"라고 했습니다. 시작에 앞서서 좋은 인상을 주고자 써모랩 샤인과 바다에 담긴 부품들을 소개하고자 합니다. 또한 저는 바람을 이미 구매하신 유저라도 알아두면 좋을만한 정보를 담고있으므로 바람 샤인의 3가지 주요 변경점을 기술하였습니다.]
-First Look
[-외관]
a. Thermolab Shine: Nikel coating make looking great!!
Size : 67 × 132 × 160 (L x W x H)mm
Weight : 625g
b. Thermolab Bada: Smaller than Shine but powerful!!
[b. 써모랩 바다: 샤인보단 작지만 강력합니다!!]
Size : 95 × 115 × 135 (L x W x H)mm
Weight : 598g(with fan)
- Components with simple comment
[-부속품과 간단한 설명]
a. Heatsink Assembly : Shine is bigger than Bada but Bada is also big enough.
b. Smart clip, Hand nut, fixing bolts for smart clip and heatsink : Thermolab wrote their product has calculated tension comparing with other types which have over tension cause damage on your motherboard. But I want to you know if you have some kind of high class motherboard than you may having trouble when you install Bada because I think that this smart clip for Baram cause may hurt on your skin but it is still easier than any other types.
[b. 스마트 클립 : 써모랩에서 적어두길 그들의 스마트 클립은 다른 제품들보다 적당한 장력을 가지고 있어서 메인보드에 피해를 주지 않는다고 합니다. 만약 전원부 히트싱크를 가진 상급 메인보드의 경우 바다 장착시 손을 다칠수 있으며 이는 스마트클립이 샤인에게만 적합해서라고 생각합니다만 다른 종류에 비해서는 장착이 쉽긴 합니다.]
c. Backplate : At last, Thermolab modified their backplate for matching on type of Intel socket
Good job Thermolab, I love you!
d. Rubber pad : You'll need this pad if you use AMD socket
e. Thermal Grease : Having Great efficiency per/cost. I love that grey color
[e. 써멀 그리스: 가격당 성능비로 최고의 효율을 자랑합니다. 난 회색이 좋아요]
f. Fan : Shine- none, Bada- single fan included
[f. 팬: 샤인-없음, 바다-싱글 팬]
-Thermolab Shine: 3 major modified issues
[-써모랩 샤인: 3가지 주요 변경점]
a. Almost of heatsink with pipe has loss when the heatsink and pipe is welded in normal way. So, Thermolab apply a welding technology which have far more efficiency than other one.
[ a. 대부분의 히트싱크와 파이크가 용접시 손실이 발생합니다. 그래서 써모랩은 다른 타입에 비해서 고효율을 가진 용접 기술을 도입했습니다]
b. Usually, a coated heatsink has more thermal loss compare with uncoated one. This is because when the heatsink coated, especially, on the base, which is closest contact part on the CPU, become a concave shape. Although you spread enough thermal grease on the base, no matter what it doesn't work. So, solve this problem. Thermolab was researching on new technology which called SFT, Super Flatness Technology. As you can see, base is so rough compare with other types, other one usually looks like some kind of mirror because Thermolab carved coated base from outside to inside of base and make it flat for solve the problem.
c. Base is welding of two parts, one is down side and I already mention the benefit of it and the other is upper side which covered down side. You can't figure it out in your eyes because of coating but if you scratch it out then you'll find that Thermolab use different way on upper side. This technology makes easily
exhalation the heat than old one.
[c. 베이스의 용접은 두부분인데, 하나는 이미 언급한 아래쪽이고 다른 하나는 아래를 덮어버리는 상판입니다. 코팅 때문에 육안으로는 확인 할 수 없지만, 상판을 벗겨버리면 써모랩이 상팬에 새로운 기술을 적용했다는 것임을 알게 될것입니다. 이 기술은 예전것에 비해서 쉽게 열을 방출하게 됩니다.]
3. Installation
[3. 장착]
Notice: Don’t unpack and eat the silicagel while you are installing.
I know installation makes you hungry but please don’t try it.
[주의: 장착중 실리카겔을 뜯어서 먹지마세요. 장착하는것이 당신을 배고프게 만들겠지만 제발하지 마세요.]
4. Test Setting
[4. 테스트 세팅]
-Total test System Information
[-테스트 시스템 사양]
CPU : Intel core i7-860
MOB : Foxconn inferno katana
RAM : G.Skill trident DDR3 2G PC3-16000 CL9 *2
VGA : HIS Radeon HD 5770 D5 1GB
ODD : Super-WriteMaster SH-S223B
HDD : WD 640GB Caviar Black
PSU : FSP ZEN400 Fanless
-Environment
[-주변 환경]
Case : Antec P182SE(Closed)
CPU Cooler for main test : Thermolab Shine.
120mm Fan for Shine heatsink: 1200rpm 31CFM/1600rpm 56CFM/2000rpm 79CFM.
CPU Cooler for comparison : Thermolab Bada.
-Measuring Equipment
[-측정 장비]
Zalman MFC3 : Measuring Watt consumption and temperature
-Software
[-소프트웨어]
OS : Microsoft Windows7 X64
-Benchmark Tools
[-벤치마크 툴]
Foxconn AegisPanel : Voltage and Bus tweak, Measure Voltage at full load
Prime 95 : X64, using 8-threads
5. Test Results
[5. 테스트 결과]
Note:
[알아야할 사항:]
*voltage isn’t important since I have measured CPU wattage consumption and I measured environment component’s temperature because CPU isn’t only thing that affected by temperature.
[CPU 소모전력을 전었으므로 인가 전압이 중요하지 않으며 주변 기기의 온도도 측정했는데 이는 CPU만이 온도의 영향을 받는 기기가 아니기 때문입니다. 즉, 주변 환경도 중요]
*In the test of Thermolab Shine, I set the voltage at higher than CPU needed at 3.6Ghz because I want to show you how dangerous that closed case affect on your VRM.
[샤인테스트 3.6Ghz 상에서 실제 필요 전압보다 상당히 높게 부하를 주었는데 이는 폐쇄된 케이스 환경이 전원부에 주는 영향으로 인한 위험을 보여주고 싶어서 입니다]
*When you see the table, I recommand you to refer to actual how much TDP CPU coast.
[표를 보실때 실제 소모된 TDP로 비교하시기 바랍니다]
*CPU idle/load, VRM idle/load: measured by MFC3 sensor[MFC3 센서값]
*Temp idle/load: measured by CPU integrated sensor[내부 센서값]
*MEM idle/load, VGA idle/load: measured by integrated sensor[내부 센서값]
a. Thermolab Bada test results
[a. 써모랩 바다 테스트 결과]
|
-Bada 1500RPM |
|
|
|
| |||||
|
Setting |
Temperature(C) |
|
|
|
| ||||
|
BUS |
Clock |
CPU idle |
VRM idle |
MEM idle |
VGA idle |
|
|
|
|
|
133 |
2.80Ghz: |
32.1 |
39.8 |
31 |
44 |
|
|
|
|
|
DDR3-1333 |
2.93Ghz: |
31.7 |
41.6 |
36 |
43 |
|
|
|
|
|
167 |
3.00Ghz: |
32.4 |
41.6 |
35 |
44 |
|
|
|
|
|
|
3.16Ghz: |
32.7 |
42.6 |
37 |
44 |
|
|
|
|
|
DDR3-2000 |
3.33Ghz: |
33.2 |
41.4 |
35 |
44 |
|
|
|
|
|
|
3.50Ghz: |
33.1 |
46.3 |
38 |
44 |
|
|
|
|
|
Setting |
TDP |
Temperature(C) |
| ||||||
|
BUS |
Clock |
idle |
load |
CPU TDP |
CPU load |
VRM load |
MEM |
VGA |
|
|
133 |
2.80Ghz: |
72 |
167 |
95 |
44.2 |
71.9 |
41 |
45 |
|
|
DDR3-1333 |
2.93Ghz: |
78 |
176 |
98 |
45 |
74.1 |
37 |
44 |
|
|
167 |
3.00Ghz: |
84 |
176 |
92 |
45 |
69 |
38 |
45 |
|
|
|
3.16Ghz: |
84 |
189 |
105 |
46.3 |
72.5 |
38 |
44 |
|
|
DDR3-2000 |
3.33Ghz: |
86 |
204 |
118 |
48.5 |
79.6 |
39 |
45 |
|
|
|
3.50Ghz: |
85 |
219 |
134 |
51 |
93.3 |
40 |
44 |
|
|
-Bada 2250RPM |
| ||||||||
|
Setting |
TDP |
Temperature(C) |
| ||||||
|
BUS |
Clock |
idle |
load |
CPU TDP |
CPU load |
VRM load |
MEM |
VGA |
|
|
133 |
2.80Ghz: |
72 |
167 |
95 |
41.2 |
69.3 |
40 |
43 |
|
|
DDR3-1333 |
2.93Ghz: |
78 |
176 |
98 |
41.8 |
72 |
38 |
43 |
|
|
167 |
3.00Ghz: |
84 |
176 |
92 |
42.1 |
67.7 |
39 |
44 |
|
|
|
3.16Ghz: |
84 |
189 |
105 |
43.2 |
72 |
40 |
44 |
|
|
DDR3-2000 |
3.33Ghz: |
86 |
204 |
118 |
44.8 |
78.8 |
40 |
44 |
|
|
|
3.50Ghz: |
85 |
219 |
134 |
46.6 |
91 |
41 |
44 |
|
|
-Bada 3000RPM |
| ||||||||
|
Setting |
TDP |
Temperature(C) |
| ||||||
|
BUS |
Clock |
idle |
load |
CPU TDP |
CPU load |
VRM load |
MEM |
VGA |
|
|
133 |
2.80Ghz: |
72 |
167 |
95 |
39.5 |
64.1 |
39 |
42 |
|
|
DDR3-1333 |
2.93Ghz: |
78 |
176 |
98 |
40.8 |
68.8 |
38 |
43 |
|
|
167 |
3.00Ghz: |
84 |
176 |
92 |
41 |
64.4 |
40 |
43 |
|
|
|
3.16Ghz: |
84 |
189 |
105 |
42 |
69.1 |
40 |
43 |
|
|
DDR3-2000 |
3.33Ghz: |
86 |
204 |
118 |
43.3 |
74.5 |
41 |
44 |
|
|
|
3.50Ghz: |
85 |
219 |
134 |
45.1 |
86.2 |
41 |
43 |
|
|
|
|
|
| ||||||
|
Setting |
Temperature(C) |
|
|
| |||||
|
BUS |
Clock |
CPU idle |
Temp idle |
VRM idle |
MEM idle |
VGA idle |
|
|
|
|
133 |
2.80Ghz: |
30.5 |
30 |
33.4 |
31 |
43 |
|
|
|
|
DDR3-1333 |
2.93Ghz: |
32.3 |
34 |
37.4 |
36 |
45 |
|
|
|
|
200 |
3.00Ghz: |
31.5 |
32 |
36.5 |
29 |
43 |
|
|
|
|
|
3.20Ghz: |
33.3 |
35 |
40.1 |
39 |
45 |
|
|
|
|
DDR3-2000 |
3.40Ghz: |
34.3 |
37 |
43.3 |
37 |
46 |
|
|
|
|
|
3.60Ghz: |
33.1 |
35 |
46.1 |
38 |
45 |
|
|
|
|
Setting |
TDP |
Temperature(C) | |||||||
|
BUS |
Clock |
idle |
load |
CPU TDP |
CPU load |
Temp load |
VRM load |
MEM |
VGA |
|
133 |
2.80Ghz: |
82 |
174 |
92 |
41.2 |
57 |
45 |
34 |
45 |
|
DDR3-1333 |
2.93Ghz: |
82 |
182 |
100 |
42.3 |
59 |
47.1 |
36 |
45 |
|
200 |
3.00Ghz: |
78 |
188 |
110 |
43.2 |
63 |
64.5 |
37 |
44 |
|
|
3.20Ghz: |
77 |
200 |
123 |
47.7 |
65 |
73.4 |
41 |
48 |
|
DDR3-2000 |
3.40Ghz: |
77 |
229 |
152 |
49.5 |
75 |
84.2 |
40 |
47 |
|
|
3.60Ghz: |
80 |
290 |
210 |
54.1 |
88 |
Hi |
41 |
47 |
|
-Shine 1600 RPM | |||||||||
|
Setting |
TDP |
Temperature(C) | |||||||
|
BUS |
Clock |
idle |
load |
CPU TDP |
CPU load |
Temp load |
VRM load |
MEM |
VGA |
|
133 |
2.80Ghz: |
82 |
174 |
92 |
39.5 |
56 |
46 |
35 |
44 |
|
DDR3-1333 |
2.93Ghz: |
82 |
182 |
100 |
40.7 |
59 |
49 |
37 |
44 |
|
200 |
3.00Ghz: |
78 |
188 |
110 |
40.7 |
57 |
64 |
38 |
44 |
|
|
3.20Ghz: |
77 |
200 |
123 |
44.7 |
65 |
72.6 |
41 |
46 |
|
DDR3-2000 |
3.40Ghz: |
77 |
229 |
152 |
46.4 |
72 |
83 |
41 |
47 |
|
|
3.60Ghz: |
80 |
290 |
210 |
49.3 |
79 |
Hi |
40 |
47 |
|
-Shine 2000RPM | |||||||||
|
Setting |
TDP |
Temperature(C) | |||||||
|
BUS |
Clock |
idle |
load |
CPU TDP |
CPU load |
Temp load |
VRM load |
MEM |
VGA |
|
133 |
2.80Ghz: |
82 |
174 |
92 |
38.4 |
56 |
45.5 |
36 |
43 |
|
DDR3-1333 |
2.93Ghz: |
82 |
182 |
100 |
39.7 |
58 |
47.6 |
37 |
43 |
|
200 |
3.00Ghz: |
78 |
188 |
110 |
39.2 |
55 |
60.7 |
390 |
42 |
|
|
3.20Ghz: |
77 |
200 |
123 |
42.8 |
60 |
69.1 |
41 |
45 |
|
DDR3-2000 |
3.40Ghz: |
77 |
229 |
152 |
44.6 |
70 |
79.8 |
41 |
45 |
|
|
3.60Ghz: |
80 |
290 |
210 |
47.5 |
78 |
Hi |
39 |
46 |
-Conclusion
[-결론]
I was so glad when I heard that Thermolab released Shine on the market because I already used Baram and now I’m using Bada. Also, I know how Thermolab’s cooling solution works great on my burning CPU. Before I am on a test Thermolab shine, I have to called Thermolab about modified issues from Baram because I can’t find any diffentiation except nikel coating. I thought nothing different except better appearance but my thought was wrong. As we know from other tests, coated heatsink has less thermal efficiency than others even it comes from uncoated original one. While anyone doesn’t care about the problem, only Thermolab build a new solution, which called SFT and I already mention it, and delayed their release schedule for this even other heatsink took their cooling throne. After I know the changes and why Thermolab delayed their new product schedule, I just nodded my head and I was stunned by their thought for a while. My tests prove everything. Now, the time for run to a store and put Shine crown on your burning CPU.
[바다를 사용하고 있고 한때 바람을 사용했던 저로서 써모랩에서 샤인을 출시한다고 했을때 매우 기뻐했습니다. 또한 써모랩이 타들어가는 CPU에서 얼마나 작동을 잘하나 알고는 있었지만 샤인이 바람으로부터 변경된 점을 알아보기 위해서 써모랩에 전화를 했는데 이는 니켈코팅 이외의 차이점을 발견할수 없어서 입니다. 솔직히 코팅말고는 틀릴게 없다는건 제 잘못된 생각이었습니다. 다른 테스트에서 보았듯이 코팅된 히트 싱크는 코팅이 안된 것에 비해서 적은 열효율을 가지고있고 코팅안된 오리지널 제품에 비해서도 그렇습니다. 다른 사람들이 별로 신경을 안썼지만 써모랩은 SFT라는 새로운 대안을 만들었고 다른 제품이 그들의 왕좌를 빼앗았음에도 문제 해결을 위해서 제품 출시를 미뤘다고 합니다. 써모랩이 신제품 출시를 지연한것과 그 이유를 알게되면서 저는 숙연해졌으며 저의 테스트가 그들의 모든것을 보여주고 있습니다. 이제 용산으로 달려가 샤인의 왕관을 당신의 타들어가는 CPU에 씌워버릴 시간이 왔습니다.]
-Summary
[-요약]
a. Shine for extreme overclocker CPU on fire and Extreme quiet cooling user
(With Noctua 120mm for quiet and Apolish 120mm for extreme over)
[a. 샤인은 씨피유가 불이날것 같은 극오버또는 극저소음을 추구하는 사용자 용입니다(녹투아로는 저소음이 구현되며 아폴리쉬 팬으로는 극오버가 가능합니다)]
b. Bada for Normal user, normal overclocker and after quiet cooling solution
(Included fan works from 500RPM to 3000RPM)
[b. 바다는 일반 사용자, 적당한 오버 또는 저소음을 위한 대안입니다(포함된 팬은 500RPM~3000RPM으로 동작하게됩니다.)]
-Contact me via mail If you have question about the test.
Mail address: final-land@hanmail.net
-Also you can find out other informations from playwares.
http://www.playwares.com/xe/9033578/c1a/trackback
BARAM Shine (CPU Cooler) - Reviews 제 목 저 자 링 크 비 고 써모랩 BARAM Shine 필드테스트 릴루님(플웨즈) link Thermolab Baram Shine Field Test (English version) 전기...